iPhone, iPod, iPad and iOS 7/iOS 6.1.3/iOS 6.1.4 Firmware/Software Download,iOS 7 Jailbreak Download ...

iosdl.com
  • Domain Name
    iosdl.com
  • Favicon
  • Google Page Rank
    1
  • Alexa Rank
    #282171
  • Page Size
    54.9 KB
  • Ip Address
    108.162.195.60
  • Heading
    H1: 1, H2: 3, H3: 2, H4: 3, H5: 0, H6: 0
  • Images
    0 GIF, 0 JPG, 1 PNG

Website Meta Analysis

  • Title
    iPhone, iPod, iPad and Firmware/Software Download -iOS 7/iOS 6.1.3/iOS 6.1.4 Download | iOSDay
  • Meta Keyword
    iOS 7,iOS 6.1.4 download,iOS 6.1.3 Jailbreak,iOS 6.1.4 Jailbreak,iOS 6.1,iOS 6.1 Firmware Download,iOS Firmware,iOS Download
  • Meta Description
    iPhone, iPod, iPad and iOS 7/iOS 6.1.3/iOS 6.1.4 Firmware/Software Download,iOS 7 Jailbreak Download

Technical Analysis

  • Webserver
    cloudflare-nginx
  • Ip Address
    108.162.195.60
  • Domain Age
    1 Years, 11 Months, 8 days.
  • Javascript Library
    jquery
  • Language used
    HTML, CSS, Javascript

Hyper Text Transfer Protocol (HTTP) header show data header response from iosdl.com.

HTML Analysis

  • server: cloudflare-nginx
  • date: Sat, 24 Aug 2013 03:44:12 GMT
  • content-type: text/html; charset=UTF-8
  • connection: keep-alive
  • vary: Accept-Encoding
  • x-powered-by: PHP/5.3.17
  • cache-control: max-age=3, must-revalidate
  • wp-super-cache: Served supercache file from PHP
  • cf-ray: a2d0aead19805a3
  • content-encoding: gzip
  • x-google-cache-control: remote-fetch
  • via: HTTP/1.1 GWA
No data whois for iosdl.com

IP 108.162.195.60 Analysis

  • Country Code
  • Country Code3
  • Country Name
  • City
  • Continent Code
  • Latitude
  • Longitude
  • No whois ip data for 108.162.195.60

In Page Analysis

Traffic Analysis

Magestic Backlinks
Daily Ranks
Rank Trend
Visitor Trend
Bounce Trend

HTML Analysis

HTML validation
  • 5 Errors
  • 1 Warnings
Ratio Text/Html
  • 0.7944106450350447
Message Error
  • Error Line 8, Column 115: end tag for "meta" omitted, but OMITTAG NO was specified
    …Phone, iPod, iPad and Firmware/Software Download,iOS 6.1.2 Jailbreak Download">

    You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".

  • Info Line 8, Column 1: start tag was here
    <meta name="description" content="iPhone, iPod, iPad and Firmware/Software Down…
  • Error Line 11, Column 78: required attribute "type" not specified
    …src="http://ajax.googleapis.com/ajax/libs/jquery/1.8.1/jquery.min.js"></script>

    The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.

    Typical values for type are type="text/css" for <style> and type="text/javascript" for <script>.

  • Error Line 12, Column 31: required attribute "type" not specified
    <script src="files/jqModal.js"></script>

    The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.

    Typical values for type are type="text/css" for <style> and type="text/javascript" for <script>.

  • Error Line 13, Column 8: required attribute "type" not specified
    <script>

    The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.

    Typical values for type are type="text/css" for <style> and type="text/javascript" for <script>.

  • Error Line 16, Column 25: required attribute "type" not specified
    <script src="adframe.js"></script>

    The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.

    Typical values for type are type="text/css" for <style> and type="text/javascript" for <script>.

  • Error Line 17, Column 8: required attribute "type" not specified
    <script>

    The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.

    Typical values for type are type="text/css" for <style> and type="text/javascript" for <script>.

  • Warning Line 32, Column 30: character "<" is the first character of a delimiter but occurred as data
                for(var i = 0; i < document.images.length; i++){

    This message may appear in several cases:

    • You tried to include the "<" character in your page: you should escape it as "&lt;"
    • You used an unescaped ampersand "&": this may be valid in some contexts, but it is recommended to use "&amp;", which is always safe.
    • Another possibility is that you forgot to close quotes in a previous tag.
  • Warning Line 101, Column 62: character "&" is the first character of a delimiter but occurred as data
    …xOf('http://appldnld.apple.com') != 0 && url.indexOf('http://pfd.apple.com') !…

    This message may appear in several cases:

    • You tried to include the "<" character in your page: you should escape it as "&lt;"
    • You used an unescaped ampersand "&": this may be valid in some contexts, but it is recommended to use "&amp;", which is always safe.
    • Another possibility is that you forgot to close quotes in a previous tag.
  • Warning Line 101, Column 63: character "&" is the first character of a delimiter but occurred as data
    …Of('http://appldnld.apple.com') != 0 && url.indexOf('http://pfd.apple.com') !=…

    This message may appear in several cases:

    • You tried to include the "<" character in your page: you should escape it as "&lt;"
    • You used an unescaped ampersand "&": this may be valid in some contexts, but it is recommended to use "&amp;", which is always safe.
    • Another possibility is that you forgot to close quotes in a previous tag.
  • Warning Line 129, Column 56: character "&" is the first character of a delimiter but occurred as data
    … if(data.name.indexOf("iPhone") == -1 && data.name.indexOf("iPod touch") == -1…

    This message may appear in several cases:

    • You tried to include the "<" character in your page: you should escape it as "&lt;"
    • You used an unescaped ampersand "&": this may be valid in some contexts, but it is recommended to use "&amp;", which is always safe.
    • Another possibility is that you forgot to close quotes in a previous tag.
  • Warning Line 129, Column 57: character "&" is the first character of a delimiter but occurred as data
    …if(data.name.indexOf("iPhone") == -1 && data.name.indexOf("iPod touch") == -1 …

    This message may appear in several cases:

    • You tried to include the "<" character in your page: you should escape it as "&lt;"
    • You used an unescaped ampersand "&": this may be valid in some contexts, but it is recommended to use "&amp;", which is always safe.
    • Another possibility is that you forgot to close quotes in a previous tag.
  • Warning Line 129, Column 97: character "&" is the first character of a delimiter but occurred as data
    …1 && data.name.indexOf("iPod touch") == -1 && data.name.indexOf("iPad") == -1){

    This message may appear in several cases:

    • You tried to include the "<" character in your page: you should escape it as "&lt;"
    • You used an unescaped ampersand "&": this may be valid in some contexts, but it is recommended to use "&amp;", which is always safe.
    • Another possibility is that you forgot to close quotes in a previous tag.
  • Warning Line 129, Column 98: character "&" is the first character of a delimiter but occurred as data
    …1 && data.name.indexOf("iPod touch") == -1 && data.name.indexOf("iPad") == -1){

    This message may appear in several cases:

    • You tried to include the "<" character in your page: you should escape it as "&lt;"
    • You used an unescaped ampersand "&": this may be valid in some contexts, but it is recommended to use "&amp;", which is always safe.
    • Another possibility is that you forgot to close quotes in a previous tag.
  • Error Line 130, Column 98: document type does not allow element "a" here
    …lectButton = '<a href="index.html#" id="serial-number-select" class="right">' +

    The element named above was found in a context where it is not allowed. This could mean that you have incorrectly nested elements -- such as a "style" element in the "body" section instead of inside "head" -- or two elements that overlap (which is not allowed).

    One common cause for this error is the use of XHTML syntax in HTML documents. Due to HTML's rules of implicitly closed elements, this error can create cascading effects. For instance, using XHTML's "self-closing" tags for "meta" and "link" in the "head" section of a HTML document may cause the parser to infer the end of the "head" section and the beginning of the "body" section (where "link" and "meta" are not allowed; hence the reported error).

  • Error Line 131, Column 830: document type does not allow element "br" here
    …NIAAAAAElFTkSuQmCC" alt="tick" width="16" height="16" /> Select it!</a><br />';

    The element named above was found in a context where it is not allowed. This could mean that you have incorrectly nested elements -- such as a "style" element in the "body" section instead of inside "head" -- or two elements that overlap (which is not allowed).

    One common cause for this error is the use of XHTML syntax in HTML documents. Due to HTML's rules of implicitly closed elements, this error can create cascading effects. For instance, using XHTML's "self-closing" tags for "meta" and "link" in the "head" section of a HTML document may cause the parser to infer the end of the "head" section and the beginning of the "body" section (where "link" and "meta" are not allowed; hence the reported error).

  • Error Line 135, Column 27: document type does not allow element "hr" here
                        '<hr />You got an ' + data.name + ' ' + data.generation + '…

    The element named above was found in a context where it is not allowed. This could mean that you have incorrectly nested elements -- such as a "style" element in the "body" section instead of inside "head" -- or two elements that overlap (which is not allowed).

    One common cause for this error is the use of XHTML syntax in HTML documents. Due to HTML's rules of implicitly closed elements, this error can create cascading effects. For instance, using XHTML's "self-closing" tags for "meta" and "link" in the "head" section of a HTML document may cause the parser to infer the end of the "head" section and the beginning of the "body" section (where "link" and "meta" are not allowed; hence the reported error).

  • Error Line 135, Column 86: document type does not allow element "br" here
    …          '<hr />You got an ' + data.name + ' ' + data.generation + '.<br />' +

    The element named above was found in a context where it is not allowed. This could mean that you have incorrectly nested elements -- such as a "style" element in the "body" section instead of inside "head" -- or two elements that overlap (which is not allowed).

    One common cause for this error is the use of XHTML syntax in HTML documents. Due to HTML's rules of implicitly closed elements, this error can create cascading effects. For instance, using XHTML's "self-closing" tags for "meta" and "link" in the "head" section of a HTML document may cause the parser to infer the end of the "head" section and the beginning of the "body" section (where "link" and "meta" are not allowed; hence the reported error).

  • Error Line 137, Column 65: document type does not allow element "br" here
    …            (parseInt(data.capacity) / 1024) + 'GB.<br /><br />' + selectButton

    The element named above was found in a context where it is not allowed. This could mean that you have incorrectly nested elements -- such as a "style" element in the "body" section instead of inside "head" -- or two elements that overlap (which is not allowed).

    One common cause for this error is the use of XHTML syntax in HTML documents. Due to HTML's rules of implicitly closed elements, this error can create cascading effects. For instance, using XHTML's "self-closing" tags for "meta" and "link" in the "head" section of a HTML document may cause the parser to infer the end of the "head" section and the beginning of the "body" section (where "link" and "meta" are not allowed; hence the reported error).

  • Error Line 137, Column 71: document type does not allow element "br" here
    …            (parseInt(data.capacity) / 1024) + 'GB.<br /><br />' + selectButton

    The element named above was found in a context where it is not allowed. This could mean that you have incorrectly nested elements -- such as a "style" element in the "body" section instead of inside "head" -- or two elements that overlap (which is not allowed).

    One common cause for this error is the use of XHTML syntax in HTML documents. Due to HTML's rules of implicitly closed elements, this error can create cascading effects. For instance, using XHTML's "self-closing" tags for "meta" and "link" in the "head" section of a HTML document may cause the parser to infer the end of the "head" section and the beginning of the "body" section (where "link" and "meta" are not allowed; hence the reported error).

  • Error Line 185, Column 8: required attribute "type" not specified
    <script>

    The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.

    Typical values for type are type="text/css" for <style> and type="text/javascript" for <script>.

  • Warning Line 190, Column 61: cannot generate system identifier for general entity "appId"
    …  js.src = "//connect.facebook.net/en_GB/all.js#xfbml=1&appId=145837632181682";

    An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".

    Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&amp;" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and &aelig; are different characters.

    If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.

    Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.

  • Error Line 190, Column 61: general entity "appId" not defined and no default entity
    …  js.src = "//connect.facebook.net/en_GB/all.js#xfbml=1&appId=145837632181682";

    This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.

  • Warning Line 190, Column 66: reference not terminated by REFC delimiter
    …  js.src = "//connect.facebook.net/en_GB/all.js#xfbml=1&appId=145837632181682";

    If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.

  • Error Line 190, Column 66: reference to entity "appId" for which no system identifier could be generated
    …  js.src = "//connect.facebook.net/en_GB/all.js#xfbml=1&appId=145837632181682";

    This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.

  • Info Line 190, Column 60: entity was defined here
    …  js.src = "//connect.facebook.net/en_GB/all.js#xfbml=1&appId=145837632181682";
  • Error Line 194, Column 44: required attribute "alt" not specified
    <img style="display: none;" src="icon.png"/>

    The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.

    Typical values for type are type="text/css" for <style> and type="text/javascript" for <script>.

  • Error Line 194, Column 44: document type does not allow element "img" here; missing one of "p", "h1", "h2", "h3", "h4", "h5", "h6", "div", "address", "fieldset", "ins", "del" start-tag
    <img style="display: none;" src="icon.png"/>

    The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.

    One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").

  • Error Line 239, Column 112: there is no attribute "rel"
    …AppleTV2,1_4.1_8M89_Restore.ipsw" rel="icon appletv">Apple TV 2 (4.1/8M89)</op…

    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

  • Warning Line 400, Column 54: cannot generate system identifier for general entity "f"
    …http://www.megaupload.com/?d=2udy83m0&f=iPod1,1_2.2_5G77_Restore.ipsw" rel="ic…

    An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".

    Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&amp;" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and &aelig; are different characters.

    If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.

    Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.

  • Error Line 400, Column 54: general entity "f" not defined and no default entity
    …http://www.megaupload.com/?d=2udy83m0&f=iPod1,1_2.2_5G77_Restore.ipsw" rel="ic…

    This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.

  • Warning Line 400, Column 55: reference not terminated by REFC delimiter
    …ttp://www.megaupload.com/?d=2udy83m0&f=iPod1,1_2.2_5G77_Restore.ipsw" rel="ico…

    If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.

  • Warning Line 400, Column 55: reference to external entity in attribute value
    …ttp://www.megaupload.com/?d=2udy83m0&f=iPod1,1_2.2_5G77_Restore.ipsw" rel="ico…

    This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&amp;'.

  • Error Line 400, Column 55: reference to entity "f" for which no system identifier could be generated
    …ttp://www.megaupload.com/?d=2udy83m0&f=iPod1,1_2.2_5G77_Restore.ipsw" rel="ico…

    This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.

  • Info Line 400, Column 53: entity was defined here
    …"http://www.megaupload.com/?d=2udy83m0&f=iPod1,1_2.2_5G77_Restore.ipsw" rel="i…
  • Warning Line 402, Column 55: reference not terminated by REFC delimiter
    …ttp://www.megaupload.com/?d=O8HIE3LU&f=iPod1,1_3.0_7A341_Restore.ipsw" rel="ic…

    If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.

  • Warning Line 402, Column 55: reference to external entity in attribute value
    …ttp://www.megaupload.com/?d=O8HIE3LU&f=iPod1,1_3.0_7A341_Restore.ipsw" rel="ic…

    This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&amp;'.

  • Error Line 402, Column 55: reference to entity "f" for which no system identifier could be generated
    …ttp://www.megaupload.com/?d=O8HIE3LU&f=iPod1,1_3.0_7A341_Restore.ipsw" rel="ic…

    This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.

  • Info Line 400, Column 53: entity was defined here
    …"http://www.megaupload.com/?d=2udy83m0&f=iPod1,1_2.2_5G77_Restore.ipsw" rel="i…
  • Warning Line 403, Column 55: reference not terminated by REFC delimiter
    …ttp://www.megaupload.com/?d=HXHEIJTW&f=iPod1,1_3.1.2_7D11_Restore.ipsw" rel="i…

    If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.

  • Warning Line 403, Column 55: reference to external entity in attribute value
    …ttp://www.megaupload.com/?d=HXHEIJTW&f=iPod1,1_3.1.2_7D11_Restore.ipsw" rel="i…

    This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&amp;'.

  • Error Line 403, Column 55: reference to entity "f" for which no system identifier could be generated
    …ttp://www.megaupload.com/?d=HXHEIJTW&f=iPod1,1_3.1.2_7D11_Restore.ipsw" rel="i…

    This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.

  • Info Line 400, Column 53: entity was defined here
    …"http://www.megaupload.com/?d=2udy83m0&f=iPod1,1_2.2_5G77_Restore.ipsw" rel="i…
  • Warning Line 408, Column 55: reference not terminated by REFC delimiter
    …ttp://www.megaupload.com/?d=4OMSSCHA&f=iPod2,1_3.0_7A341_Restore.ipsw" rel="ic…

    If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.

  • Warning Line 408, Column 55: reference to external entity in attribute value
    …ttp://www.megaupload.com/?d=4OMSSCHA&f=iPod2,1_3.0_7A341_Restore.ipsw" rel="ic…

    This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&amp;'.

  • Error Line 408, Column 55: reference to entity "f" for which no system identifier could be generated
    …ttp://www.megaupload.com/?d=4OMSSCHA&f=iPod2,1_3.0_7A341_Restore.ipsw" rel="ic…

    This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.

  • Info Line 400, Column 53: entity was defined here
    …"http://www.megaupload.com/?d=2udy83m0&f=iPod1,1_2.2_5G77_Restore.ipsw" rel="i…
  • Warning Line 409, Column 55: reference not terminated by REFC delimiter
    …ttp://www.megaupload.com/?d=OYX1RLXG&f=iPod2,1_3.1.2_7D11_Restore.ipsw" rel="i…

    If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.

  • Warning Line 409, Column 55: reference to external entity in attribute value
    …ttp://www.megaupload.com/?d=OYX1RLXG&f=iPod2,1_3.1.2_7D11_Restore.ipsw" rel="i…

    This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&amp;'.

  • Error Line 409, Column 55: reference to entity "f" for which no system identifier could be generated
    …ttp://www.megaupload.com/?d=OYX1RLXG&f=iPod2,1_3.1.2_7D11_Restore.ipsw" rel="i…

    This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.

  • Info Line 400, Column 53: entity was defined here
    …"http://www.megaupload.com/?d=2udy83m0&f=iPod1,1_2.2_5G77_Restore.ipsw" rel="i…
  • Error Line 497, Column 60: required attribute "src" not specified
    <img id="cat" style="max-width: 180px; max-height: 160px;"/>

    The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.

    Typical values for type are type="text/css" for <style> and type="text/javascript" for <script>.

  • Error Line 497, Column 60: required attribute "alt" not specified
    <img id="cat" style="max-width: 180px; max-height: 160px;"/>

    The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.

    Typical values for type are type="text/css" for <style> and type="text/javascript" for <script>.

  • Error Line 512, Column 7: end tag for element "form" which is not open
    </form>

    The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.

    If this error occurred in a script section of your document, you should probably read this FAQ entry.

  • Error Line 526, Column 46: there is no attribute "target"
    …="http://appdl.net/?iosdl.com" target="_blank" id="serial-number-trigger">A fr…

    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

  • Error Line 527, Column 73: ID "serial-number-trigger" already defined
    …s.com/?iosdl.com" target="_blank" id="serial-number-trigger">Must-Have Mac App…

    An "id" is a unique identifier. Each time this attribute is used in a document it must have a different value. If you are using this attribute as a hook for style sheets it may be more appropriate to use classes (which group elements) than id (which are used to identify exactly one element).

  • Info Line 526, Column 59: ID "serial-number-trigger" first defined here
    …l.net/?iosdl.com" target="_blank" id="serial-number-trigger">A free Mac OS X a…
  • Error Line 528, Column 59: ID "serial-number-trigger" already defined
    …s.com/?iosdl.com" target="_blank" id="serial-number-trigger">Open source Objec…

    An "id" is a unique identifier. Each time this attribute is used in a document it must have a different value. If you are using this attribute as a hook for style sheets it may be more appropriate to use classes (which group elements) than id (which are used to identify exactly one element).

  • Info Line 526, Column 59: ID "serial-number-trigger" first defined here
    …l.net/?iosdl.com" target="_blank" id="serial-number-trigger">A free Mac OS X a…
  • Error Line 532, Column 61: ID "serial-number-trigger" already defined
    …n.com/?iosdl.com" target="_blank" id="serial-number-trigger">New evasi0n 1.5 D…

    An "id" is a unique identifier. Each time this attribute is used in a document it must have a different value. If you are using this attribute as a hook for style sheets it may be more appropriate to use classes (which group elements) than id (which are used to identify exactly one element).

  • Info Line 526, Column 59: ID "serial-number-trigger" first defined here
    …l.net/?iosdl.com" target="_blank" id="serial-number-trigger">A free Mac OS X a…
  • Error Line 551, Column 80: there is no attribute "data-button"
    …s="twitter-follow-button" data-button="grey" data-text-color="#FFFFFF" data-li…

    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

  • Error Line 551, Column 103: there is no attribute "data-text-color"
    …n" data-button="grey" data-text-color="#FFFFFF" data-link-color="#00AEFF" data…

    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

  • Error Line 551, Column 129: there is no attribute "data-link-color"
    …-text-color="#FFFFFF" data-link-color="#00AEFF" data-show-count="false">Follow…

    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

  • Error Line 551, Column 155: there is no attribute "data-show-count"
    …="#FFFFFF" data-link-color="#00AEFF" data-show-count="false">Follow @Appked</a>

    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

  • Error Line 558, Column 6: end tag for element "div" which is not open
    </div>

    The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.

    If this error occurred in a script section of your document, you should probably read this FAQ entry.

Visitor Analysis

Daily Visitor
  • 1 visits